Valley metal
Every flashing is renewed instead of being reused.
Tile roof replacement in Elmwood Park often keeps the tile and replaces everything under it, since the underlayment usually fails decades before the tile does. Dial (551) 367-0165 to talk through a replacement with a local roofer.
A tile roof rarely needs replacing because of the tile alone. When the tile is sound, the replacement is really a rebuild of the roof under the same tile, often called a lift-and-relay or a tile reset. When the tile is brittle, badly eroded or no longer available, new tile goes on instead.
Both kinds of replacement follow one sequence. Crews remove the tile, tear off the old underlayment, fix the deck and install fresh underlayment, flashing and battens before the tile returns. Permits are typical for reroofing, with an underlayment inspection in some places.
Some tiles always break on the way off. Older tile is brittle, so a portion breaks during removal and has to be replaced with matching tile. Ask how many tiles the roofer expects to lose and where replacements will come from.
Many tile roof replacement calls in Elmwood Park also turn up a need for tile roof installation or tile roof repair.
Dealing with this in Elmwood Park, NJ right now? Call (551) 367-0165 and describe the problem to a roofer who works in Elmwood Park.
Call nowDone right, a replacement resets the clock on everything under the tile.
The roofer checks the tile for brittleness and erosion, lifts tiles to see the underlayment and looks at the deck from the attic, then recommends relaying the existing tile or installing new. Any sagging section is evaluated before the crew puts weight on it.
The crew removes tile by hand, keeping sound tile stacked for reuse and separating cracked pieces. Many crews strip and dry in one slope at a time to limit exposure.
Everything under the tile, from underlayment to battens to valley metal, is removed. Soft or rotted decking is cut out and replaced with new plywood or OSB.
The roof is dried in with new underlayment and fitted with fresh flashing throughout. New battens and new bird stops go on before the tile.
Tile is laid back on with new fasteners or adhesive, and replacement tile is blended in so the roof looks uniform. If new tile was chosen, it goes on the same way over the new layers.
Ridges and hips are capped, the roof is checked for cracked tiles and the old materials are hauled off. The permit is closed with a final inspection where required.
Every flashing is renewed instead of being reused.
Salvaged tile is relaid with new fasteners and finished with new ridge caps.
All tile is removed and sound pieces are saved with broken pieces set aside.
A new waterproof layer is installed slope to slope which is the real point of the replacement.
Damaged sheathing is cut out and renewed to carry the weight of the tile.
Tile roof underlayment replacement is the most common kind of tile roof replacement, and it keeps the existing tile. Older felt underlayment turns brittle in the heat trapped under tile and starts to split at laps and nail holes. Today, self-adhered and synthetic underlayments made for tile can last much longer than the old felt.
A Elmwood Park underlayment replacement moves across the roof in sections, so tile is staged nearby and each area is dried in quickly. It is the right time to replace valley metal, wall flashing and battens too. Done this way, a sound tile roof can get decades more service.
With clay tile, the first question is whether the tile itself still has life left. Tile that is flaking or crumbling from freeze damage is replaced, and the rest is relaid. Where enough tile has failed, the roof may be redone in new clay with a matching profile.
On older Elmwood Park homes with clay tile, keeping the original tile or matching it closely preserves the character of the house. Salvaged clay and careful placement let the finished roof look like it was never touched.
In Elmwood Park, older tile roofs often still have their original tile and their original, aging underlayment. Across Elmwood Park and nearby towns like Garfield, Fair Lawn, Paterson and Lodi, replacements on clay roofs usually reuse the tile, while worn concrete tile is more often swapped for new, and planning the work around the weather keeps each opened section protected.
Searching for tile roof replacement near me from Elmwood Park or Garfield, Fair Lawn, Paterson and Lodi? Call (551) 367-0165 to talk to a roofer who works in your part of town.
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Elmwood Park, NJ have the roof checked in the fall and again after the snow melts.
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers in Elmwood Park know the roof types and weather wear common in local homes.
Ask the roofer about the cause, the options and the estimate before work starts.
More questions? Call (551) 367-0165
Clay and concrete tile roofs installed over the right underlayment, battens and flashing, whether the home is new or switching from shingles.
Learn moreRepairs for broken tiles, worn underlayment and leaking flashing on clay and concrete tile roofs, so the tile keeps shedding water the way it should.
Learn moreFull tear-off and replacement for roofs that are worn out, storm beaten or leaking in several places, built to current code from the decking out.
Learn moreAn inspection of a tile roof from the ridge to the attic, with a written report of what needs attention now and what can wait.
Learn moreLooking for something else?
See all roofing servicesCall (551) 367-0165 for a local roofer in Elmwood Park and nearby towns.