Valley metal
Valleys, walls, chimneys and pipes get flashing sized for tile which is where tile roofs usually leak.
Tile Roofing
Tile Roof Installation Elmwood Park, NJ
A Elmwood Park tile roofer can help choose between clay and concrete, flat or curved profiles, and install the full system beneath the tile. Dial (551) 367-0165 to talk with a local roofer about a new tile roof.
Tile is one of the heaviest roofing materials a house can carry, so a tile roof installation starts below the roof. A tile roof weighs several times as much as asphalt shingles, and a home built for shingles may need an engineer to check the rafters or trusses before switching. New homes designed for tile have the load built in from the start.
The tile choice comes next. Clay holds its color through the whole tile and lasts for generations, and concrete tile is heavier, more absorbent and offers a wide range of shapes and finishes. Shapes range from flat and low profile tile to high profile S tile and traditional barrel tile.
What lasts is the system under the tile. Codes typically allow tile on slopes down to 2.5 in 12, with two layers of underlayment required on slopes under 4 in 12. Investing in the underlayment up front is what lets the tile live out its full life.
Many tile roof installation calls in Elmwood Park also turn up a need for tile roof replacement or roof installation.
Dealing with this in Elmwood Park, NJ right now? Call (551) 367-0165 to reach a nearby roofing contractor.
Call nowThe process
What happens during a tile roof installation
Each layer of a tile roof has a job, and the order matters.
Check the structure
Before ordering tile, the load on the rafters or trusses is checked, reinforcement is planned if needed and the permit is filed. Extra tile is ordered so there are matching spares for repairs later.
Dry in the roof
The deck gets edge metal and underlayment, from heavy felt to synthetic or self-adhered membrane, lapped so water runs over each seam. This is the layer that handles every drop of water that slips past the tile.
Batten layout
Battens are fastened across the roof at spacing set by the tile, and on many roofs counter battens run beneath them so water can drain freely. Some systems skip battens and fasten tile directly, depending on the profile and the slope.
Flash the details
Flashing goes in at valleys, sidewalls, headwalls, skylights and pipes, sized for the deep profile of tile. Flashing for tile is built for the depth of the tile, which is why shingle flashing details do not carry over.
Set the field tile
Tile goes on from the eave up, with an eave closure to keep birds out and fasteners or foam adhesive chosen for local wind requirements. Small cut pieces at hips and valleys get extra attention.
Finish the ridge
The ridge is finished with caps over a ridge board, set in mortar or fastened dry with a breathable closure. Before the crew packs up, cracked pieces are swapped out.
What is included
A complete tile roof system
Underlayment system
Felt, synthetic or self-adhered underlayment is installed as the real barrier against water.
Tile fastening
Tile is fastened with nails, screws, clips or adhesive in a pattern set by the tile profile.
Load check
The framing is checked for the weight of tile especially when replacing shingles.
Ridge finish
The first course gets an eave closure and the ridge gets capped to complete the system.
Related service
Barrel Tile Roof Installation Elmwood Park, NJ
Barrel tiles go on in pairs, with pans forming the water channels and rounded covers overlapping the gaps. The tapered shape lets each tile nest into the one below, creating the deep rolling texture barrel roofs are known for. Because of that depth, barrel tile needs careful work at the eaves, hips and ridges, where the open curves must be closed off.
Barrel tile roof installation in Elmwood Park calls for extra attention to fastening, since cover tiles sit high and catch wind. A crew snaps lines so pans and covers stay straight from eave to ridge.
Related service
Spanish Tile Roof Installation Elmwood Park, NJ
Spanish tile, also called S tile, merges the curved pan and cover into one interlocking piece. Both clay and concrete versions are made, in solid colors or blends from deep red to earth tones. Side interlocks help it shed water, though the curved ends need bird stops and ridge closures just like barrel tile.
For Spanish tile roof installation in Elmwood Park, the underlayment and flashing matter as much as the look of the tile. The curves make flashing tricky, so roofers use shaped metal or flexible flashing that conforms to the tile. With a color blend, tile is drawn from several pallets as it goes up so no area looks patchy.
Local help
Tile Roof Installation Near Me
Tile roofs in Elmwood Park go onto newer homes built for them and onto older homes where owners are switching from shingles. In Elmwood Park and neighboring communities including Garfield, Fair Lawn, Paterson and Lodi, the biggest variable on a conversion is whether the existing framing can carry tile, and local wind requirements decide how each tile has to be fastened.
Searching for tile roof installation near me from Elmwood Park or Garfield, Fair Lawn, Paterson and Lodi? Call (551) 367-0165 to talk to a roofer who works in your part of town.
How the weather here affects roofs around Elmwood Park
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Elmwood Park, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why not wait
Less damage
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Familiar with local homes
Roofers in Elmwood Park know the roof types and weather wear common in local homes.
Know what happens next
Ask your questions before you agree to anything.
Common questions about tile roof installation
Can tile be installed over an existing roof?
A tile roof needs a bare deck, so existing shingles or other roofing are removed. That lets the roofer check the sheathing, replace soft spots and lay a proper underlayment.
How long does it take to put on a tile roof?
A typical home takes longer than a shingle roof, often one to a few weeks depending on size, complexity and weather. Steep pitches, many hips and valleys and a structural upgrade all add time. The roof is dried in with underlayment early, so the house is protected while tiling continues.
What underlayment goes under a tile roof?
The common choices are felt, synthetic underlayment and self-adhered membrane. Since the tile can outlast the underlayment by decades, a longer lasting underlayment pays off. Codes call for two layers on slopes from 2.5 in 12 up to 4 in 12.
What is better, clay or concrete tile?
Each has real strengths. Clay keeps its color through the tile, is lighter than most concrete tile and can last for generations. Concrete is sturdy and widely available, though it absorbs more moisture and its surface weathers with age.
Can my house hold a tile roof?
A tile roof is far heavier than a shingle roof, and concrete tile tends to weigh more than clay. Whether a given house can carry it depends on the framing, which is why conversions from shingles start with a structural review. Some lighter weight tile products are made for homes with less structural capacity.
More questions? Call (551) 367-0165
Related services
Tile Roof Replacement
Full tile roof replacement when the underlayment, fasteners or tile have reached the end of their life, done slope by slope to keep the house protected.
Learn moreRoof Installation
Putting on a new roof the way the material maker intends, whether it is asphalt shingles, metal or another material.
Learn moreTile Roof Inspection
An inspection of a tile roof from the ridge to the attic, with a written report of what needs attention now and what can wait.
Learn moreRoof Ventilation
Fixing hot, damp or poorly vented attics with the right mix of intake and exhaust, based on what the attic actually needs.
Learn more
Looking for something else?
See all roofing servicesNeed tile roof installation in Elmwood Park, NJ?
Call now for Elmwood Park tile roof installation and help in the towns around it.